***UPDATE***

Broken Arrow Tactical is open for business. As of Feb. 22, 2008

I will be offering a variety of services on several polymer framed guns (Glock, Kahr, Smith and Wesson M&P, Springfield Armory XDs, and HK45 and USP). ALso, on 1911 and SIG pistols.

Example of some services:

* Tuning for total reliability (feed ramps, chamber, and breach face polished)
* Fitting match barrels
* Sight installs
* Glock grip reductions and grip shortening (example: Glock 17 with grip cut down to take Glock 19 mags - less printing under clothing)

* Stippling on frames (back, sides, or 360 degrees)
* Removing finger grooves
* Rounding trigger guards (on select models)
* Trigger jobs on select pistols


Also, in the near future, I will be doing work on long guns: Remington 700, Remington 870, M14s, and ARs.

Thanks in advance! :)

If you have questions please PM or email me : ray@brokenarrowtactical, www.brokenarrowtactical.com

***UPDATE***

Broken Arrow Tactical is open for business. As of Feb. 22, 2008



I just finished customizing my new Glock 20. I didn't know if Glock was going to make a 20SF, so I built one. :)

Brand new Glock 20 (picked up on Feb. 14, 08) - BEFORE




AFTER - Polished all internal parts, hand fitted a Bar-Sto G20 10mm Barrel, Tru-Glo T.F.O. sights, Ny-1 Trigger, Ghost 3.5 connector, ISMI 22 lb. recoil spring, ISMI Stainless steel guide rod, Grip reduction and stippling (done by me :) ) That's it for now.



Here is my Glock 34 with a partial grip reduction and my stippling job.




My customized Glock 20 with my grip reduction and stippling.


My customized Glock 21 SF with stippling on the sides. Hand fitted Bar-Sto barrel, T.F.O. sights, ISMI 20 lb. recoil spring and stainless guide rod, NY-1 trigger spring with 3.5 connector.


For the Airsoft fans - my Glock 18 :)


This post has been edited by BrokenArrow: July 19th 2008 10:50 PM

Here are some pictures of my friends' (V.P.D.) - Glock 21 (early version) and Glock 35. He wanted several modifications done to them. Grip reduction, stippling, reliability package, and trigger job.

Glock 35 (stock)



Glock 35 (modified)





Glock 21 and Glock 35



Glock 21 (stock)



Glock 21 (modified)

Kahr P-45.
I removed the standard grenade checkering and stippled the grip 360 degrees. Feed ramp, chamber , and breach face were mirror polished. Trigger job done - double action pull - smooth 5 lbs. Mag well opening is enlarged and beveled - for faster mag changes.

I finished a Glock 35 today. The customer wanted a rounded and stippled trigger guard and the stock grenade checkering removed and the grip stippled 360 degrees.






Here's a pair of Glock 34s that I finished today. My grip reduction and stippling, O.D. Gun-Kote finish, trigger jobs, and polished internals.

Here you go Daniel! Here is your Glock 17. Stippling, rounded trigger guard, stippled thumb rests, and some extras.

Illogical's XD 40- Stippled backstrap, and sides, polished feed ramp and chamber.

Here is a Glock 17 that I finished today. Gun-Kote O.D. slide, Heinie Glock sights, rounded trigger guard with stippling, grip reduction with stippling, polished chamber, feed ramp, and breach face, NY-1 trigger with 3.5 lbs connector, and stainless guide rod.

Had some free time today to make a pair of new grips for my 1911. Also, stippled the surface around the logo. :)

Here are some pictures of my work today. Tuned actions and reliability package. Stippled grip panels on the CZ75 and Beretta 92FS.

Glock 20




Glock 21 SF

Here is another set of grips that I stippled for the 92F, with Beretta logo. :)

Belongs to an Alamed County Deputy Sheriff. Glock 32 (.357 SIG). Grip reduction done with 360 degrees stippling (finger grooves and stock grenade checkering left on ). Polished trigger components, polished feed ramp and chamber, added a Lone WOlf .357 SIG barrel with ports, and a stainless steel guide rod with a Wolff 22 lb. recoil spring.

Before -


After -

New pics of the Glock 20 with finger grooves removed and stippling 360 degrees around the grip.









Finished another Glock 35. Bar-Sto .40 cal barrel, Trijicon night sights with orange front sight ring, white rear, Stainless steel guide rod with 20lb recoil spring, grip reduction with stippling, rounded trigger guard with stippling, stippled thumb pads on frame, NY-1 trigger spring with 3.5 lb connector. Magazine cut outs. Polished internals, feed ramp, chamber, and breach face.

Here is a Glock 19 frame that was completed today. Grip reduction, finger grooves left intact, stippled grip (full 360 degrees), and sharp edges of the serrated trigger radiused.

BEFORE:



AFTER:

Just finished up a Smith and Wesson M&P 45. I stippled the grip a full 360. Polished the feed ramp, polished the chamber and breach face. Tuned the trigger. Overall, I like this new gun. Smith and Wesson is really listening to the customers.

BEFORE:






AFTER:

Are you the Borken Arrow from GT?

Nope. Different guy.

Lookin damb good.

What would you charge to do a first gen g23 360 on the grip, round the trigger guard, and thumb grip?


Thanks
Doug

This post has been edited by Blueblood: April 1st 2008 11:16 AM

Thanks Blueblood.

Here is another Glock 21SF that I finished today. The following are the mods / parts used for this pistol: Lone Wolf stainless barrel, Lone Wolf stainless Guide rod and 20 lbs recoil spring, Ghost 3.5 connector, NY-1 trigger spring, Hi-Viz red (front) and green (rear) fiber optic sights, trigger job, polished chamber, feed ramp, and chamber. Grip reduction with medium stippling. Last but not least - Lone Wolf metal slide plate.

Before:






After: