I want to build a rifle from scratch and I want a stripped lower without any brand name markings on it. Are there any companies that produce such a thing?

i don't think so but someone will be along to answer this correctly.

I believe the law requires the manufacturer to put their name, location, serial number, and caliber on all receivers.

There is a company called Tactical Innovations that puts very little stuff on the lower, and its on the opposite side than where most manufacturers put their stuff.

To have a completely blank lower you have to mill the lower yourself and you can never transfer it to anyone else except in your will to family.

Anyone else who makes and sells lowers must have an FFL and put their company name, location, and serialize it. No getting around that.

So unless you have a serious milling machine in your garage and serious machining skills then you can't have a completely blank lower.


A company called Mega Machine makes a lot of custom lowers. Good stuff too. While they cannot get around the law they likely could create the most minimal version of what you want. They could do the absolute minimum allowed by law in the smallest profile possible. That's about as good as you'll get by buying it and they will definitely charge you a custom fee.

If you want this so you can put designs of your own creation on it then Mega can help you there as well. Let them put your custom design on it. They will do a bangup job too.

Their zombie killer lowers were just awesome!

Zeke...checked out their site...very cool. Thanks for the info.

Glad to help.

http://www.spikestactical.com/z/index.php?...products_id=309 This is a spikes lower with no logo on it.

are the spikes tactical lowers finished? i looked at their website, didnt see any (i was looking for the marines lower that dpms makes, figured spikes might make one) and i saw those lowers.

sorry for the dbl post. couldnt figure out how to delete it

This post has been edited by outlawskinnyd: October 31st 2009 4:47 PM

Tactical Innovations lowers are very nice lowers that have less writing and markings on them that any lower I've seen that you can buy stripped. They have a few extra features than most lowers and JTAC has a pretty good deal on them here: click. You have to add one to your cart to see the sale price.



TS

If you're handy (and so inclined) you could always finish an 80% lower. They have no S/N, or any other markings (I think). And it's "under the radar" if that matters to you. On the downside, it will cost more than buying stripped lower (drill bits, jig, reamer, tap) and can't be sold or transferred as mentioned above.

Do you have a link? That sounds really cool, but the only one I could find is apparently for an airsoft gun...

here is the link http://megamachineshop.com/

I meant to the Zombie Killer that you mentioned? I can't find it on their site...

Thanks!

This post has been edited by Akin: November 4th 2009 6:33 PM

It was a limited run and they rarely show their boutique models on their home website. Most times you see them with their distributors.

But if you have the cash they likely still have the CNC program and could make you one.

just go to this website. its got the pictures of it. its pretty bad. www.realitymod.com/...off.../34084-zombie-killer-ar15.html