This is your chance to get a Black Rain Ordnance stripped Lower Receiver, Stripped Upper Receiver and Charging Handle for a FANTASTIC price! Only offered AR15Armory members, no exceptions!

Working together as a team the AR15Armory, Amelon Firearms Coatings, Black Rain Ordnance and Addax Tactical are proud to offer this one time, never again repeated Group Buy.




This is only going to be offered as a set and no individual product is available separately for this group buy and only available in Black, but can be coated by Amelon in different colors.

I know that this set is perfect for any type of AR build that you are planning. The clean lines, finish and "Roll-mark" give this lower a unique look that is tough to beat(all parts are CNC machined, there is no stamping or pressing into the metal). This in conjunction with solid and precise matching gives you an Upper and Lower that not only will deliver solid performance, but reliability. So if you are needing a Lower and Upper for a current build or just want a set for a future build, you can't go wrong with this purchase.

For this limited Group Buy the set will be offered for $400 and a $10 flat shipping rate. And only for this Armory Group Buy, you will also get a "Let it Rain" Dust Cover to finish off your Black Rain Ordnance Build.


Compare this to a MSRP of $339 for the Lower, $289 for the Upper, $48 for the Charging Handle and $35 for the Dust Cover...this comes to a total of $711! That would be a $311 savings off of MSRP alone.

Not only would you get a fantastic product, but a Company that stands firmly behind there product, enough to guarantee Lifetime replacement for there parts.

The Specs for any Black Rain Ordnance Inc® logo marked piece is guaranteed to be:

* Of the highest quality-tested and inspected
* 7075 T6 Billet Aircraft Aluminum
* 100% CNC Precision Machined
* MIL S-8625 Type III Class 2 Hard Coat Black Anodizing
* Teflon Coated
* Mill Spec Dimension to match with any other manufacturers parts
* Guaranteed lifetime replacement

But Wait! Amelon Coatings will also single coat the parts for you in there terrific Cerakote Finish for $70, which is 50% off the retail price...so if you want to customize even further...this is your chance and on top of that Dan will include a Black Pmag with every coating for this Buy!


-Not only has Amelon generously offered this, but they have donated a free single coating of these parts to the 30th person to commit to the Group Buy!

-Also the AR15Armory will also upgrade the 20th commitment to a Silver Patron Membership (Armory Staff excluded)

-Glock10mmman has also offered two FDE Pmags to the 10th commitment.

-I am donating a DPMS LPK to be given to the winner of a drawing("pick a number" or "Names in a Hat" type drawing) at the end of the Group Buy.

Addax is also offering a sale for Lower parts Kits only for Members participating in the Group Buy. The prices are as follows:

DPMS LPK: $59.00

Stag/CMT LPK: $59.00

RRA 2 Stage National Match LPK: $145.00 (WOW!)

Shipping is $6.95

*All prizes will be awarded after payment is received for the Group Buy, if a winner fails to make payment, the award will be given to the subsequent commitment. The list of members making the purchase will be kept by myself and shared only with nwatson99, Amelon and Black Rain Ordance

I am already a proud owner of a Black Rain Ordnance Upper and Lower and can attest to the fact that the BRO Lower and Upper's are the best Billet Uppers and Lowers I have ever owned or seen.

The following pictures are of my BRO SBR and only shown as an example of the Upper and Lower. You will receive a Upper, Lower, Charging Handle and Dust cover only.







The Group Buy will be open for 40 days starting today, this gives you 40 days to set aside $10 each day! This Group-Buy will end on October 26th, 2009 at Midnight

There are no custom serial numbers available, but the Armory will be allotted consecutive numbers for the Buy(ie. 200 through 250), numbers will not be announced until later.

The payment along with a copy of you FFL that this will be sent to can be sent anytime within the 40 days, but payment will need to be received within 7 days after the Group Buy ends.

Payment should be made out to:

"Amelon Firearms" in the amount of $410 for each set.

Please make sure that your user name, name address are clearly marked on the check or money order and copy FFL(back).

All payments and paperwork the will be sent to(I recommend USPS Priority mail):

James Hoelscher
PO Box 137
Hooper Bay, AK 99604

Contact me by PM if you are interested in the Group-Buy and are wanting to make a commitment.

This post has been edited by jchtrh: October 15th 2009 8:30 PM

I am SO in on this buy! I'll have 1, please!

Thank you, James and BRO!




ETA: Oops, just read the fine print! PM inbound!

This post has been edited by HotShot: September 17th 2009 3:22 AM

Gotcha!

If I can get the $400 together by then then Im in.

Thanks go out to you and to all who helped to put this together.

This post has been edited by devil duck: September 17th 2009 4:08 AM

Thanks Guys, remember PM me so no one can guess what number commitment they are, so everyone has a fair shot at the prizes.

I was probably the first one! Hahaha!

I was so excited to place my order I didn't see that tiny fine print that said to PM you until after I posted!

No worries and no problem! You were close to the first one!

Dan at Amelon also will include a free Black Pmag for each coating purchased in the Group Buy!

Special Limited Offer from Addax Tactical for the BRO Group Buy Members.

Addax will build you one of his new, soon to be released Tactical Overwatch 18" SDM 5.56/.223 DI Upper Receiver Assemblies for $1150.00, which includes using your BRO Group Buy Upper and Charging Handle.

Shipping is also included.


This is a very limited offer, with only 4 open slots available only for the BRO Group Buy Members.
Group Buy Special Addax Tactical Overwatch 18” SDM Upper Standard Specs include:

-Group Buy Member supplied BRO Upper Receiver and Charging Handle

-White Oak SDM Fluted 1:8 twist Rifle Length Heat Treated 416 Stainless Barrel with Wylde Chamber (Cerakoted Black, with Microslicked Bore and Chamber)

-Daniel Defense 14.0” Lite Rail (Yes 14.0" Lite Rail)

-Vltor Low Profile Gas Block (set screw type in black)

-Rifle Length Gas Tube


-PWS FSC556 Compensator

-Young Mfg. Enhanced Semi Auto Bolt Carrier Group (Microslicked) with enhanced extractor spring.

-Head spaced, Test Fired, Cleaned, and Lubricated

-Addax Tactical 5 year Limited Warranty

Available Barrel Option:

-Lothar Walther 1:8 twist Polygonal Rifled, Rifle Length LW50 Stainless Barrel with Wylde Chamber (Cerakoted Black) ($125 more)

*All Cerakoting and Microslick coatings applied by Amelon Firearms*

*This price is in addition to the $400 BRO Group Buy

This post has been edited by jchtrh: September 17th 2009 4:54 PM

Damn, I sooooo want a set, but have issues with the FFL and that I am very rarely to TN where I would have to pick it up. I have to do some figuring out. Can he project a specific date for delivery so that I could request time in TN for that particular time? Also, I have to save up and set some green aside for the Black sickness....

Question for us members who live just outside of the USA, here in California...


What kind of magazine do-hicky will BRO be using to make this Cali-legal?


I hope I will be able to use a cartidge to push the button to release the magazine! I DO NOT want an alan wrench type hindrance for my magazine changing.

I do not know and I will try to find out.

Move to Oregon Hotshot you wont have to deal with the Crazy Cali Commies. Now to send James a PM. I'm stoked just need to get some cash together.






Kadin

Hotshot, You mean the Bullet Button Magazine Lock.

Are you going to be installing the LPK in your lower receiver?

If so, you need to install the Bullet Button Magazine Lock before installing the pistol grip.

If you are going to have someone else do it, the same applies.

We have Bullet Buttons and LPK's in stock, so if you want to make arragnements with Dan at Amelon to install everything, you can purchase the parts from us, and we will ship it to Dan for installation prior to his shipping out your lower to your CA ffl.

I believe Dan is already set up wtih CA DOJ to ship to California.

On another note: Since you are getting a stripped lower receiver, technically your FFL out here in Cali, can receive the Off list lower without the bullet button magazine lock installed since your lower will not have the pistol grip installed on it.

PM or Email me if you have any questions about this.

Thanks,
Chris

Thanks Chris...I was going to call you and ask you about this!

In
PM sent
PM received

I'm in as well. Sent the PM yesterday and got a response =) w00000t! Now I have one month to make more money to cover this =) (I can cover it now, but I'd rather buy it with free money...gogo stock market gambling).

I will be interested in getting the Bullet Button and LPK from you, but will email you at a later time on this for the details. I also want Dan to coat it too so that would work out great for me to have everything sent to him.

Question, can I have an AR pistol made from this BRO purchase or do I need to buy something else for that to happen?

I only know how to load, point and shoot 'em...

I'll have to think about it. I really want in on this but am tight on cash, there are two things I may be getting some cash from, if either pan out I'll almost definately be in!

I'm in PM sent to James